When conveying material in horizontal and especially ascending direction, the material could slip off the smooth conveyor belt. We have found a solution to this problem. A special rubber coating with high friction ability and a special surface design both prevent the material from slipping off the conveyor belt.

We have developed three types: SUPERGRIP, FINEGRIP and NOPPEN 3 mm.

SUPERGRIP conveyor belts are particularly suitable for conveying at high angles and/or in wet and humid conditions.

Due to its better self-cleaning ability FINEGRIP conveyor belts are especially used where dust, fine-grained material and spills could affect the tread-pattern.

NOPPEN conveyor belts are suitable when very light and rolling material is conveyed; they are noted for a smooth return run and good cleaning ability.

The construction of SUPERGRIP, FINEGRIP and NOPPEN conveyor belts:

• two- or multiply EP carcass (warp polyester + weft polyamide) for trough-shaped conveyor belts
• two- or multiply EMF carcass (warp polyester + weft monofiles polyester) for flat conveying – cross-stable
• special, extra strong rubber interlayer (skimmed layer)
• rubber coating with high friction coefficient (black or green, non-staining)
• option with coating on the bottom surface for conveyors with rollers, or bare bottom for sliding operation
• NOPPEN conveyor belts are available in almost all cover qualities

With regard to the application there are two types available:

• EP – for trough-shaped conveyors
• EMF – cross stable variant for (non-through) flat conveying

SUPERGRIP, FINEGRIP and NOPPEN conveyor belts are basically used in:

• filling of bags and packaging devices
• mail deliveries transport
• transport of bags and reloading conveyor belts
• loading and unloading conveyor belts for piece goods
• transport of boxes and bottles
• transport of baggage (airports, railway stations, etc.)
• passenger transport
• timber, wood chips transport

SUPERGRIP, FINEGRIP and NOPPEN conveyor belts are suitable for the following applications:

• cement plants
• recycling, compost preparation and processing industry
• timber industry and sawmills, paper and pulp mills
• food industry
• beverage industry
• metal processing industry
• ski –lifts (passenger transport)
• chemical industry
• ...
• at your plant

Advantages:

• decrease in skidding between the material and conveyor belt
• ratio of grade up to 32° depending on the material (our technicians will be glad to assist in selecting a proper belt)
• good troughability (not valid with EMF)
• low cost endless splicing as with regular EP conveyor belts by hot curing or cold treatment and mechanical clamping
• favourable price/efficiency ratio in comparison with conveyor belts made of plastic material
• long service life
• high flexibility at temperatures below zero

Belt widths:

• 1300, 1600 mm with cut edges. Anglo-Saxon and other widths on request..

Belt constructions:

• EP250/2, EP400/3, EP500/4, EMF250/2, EMF400/3. Anglo-Saxon and other widths on request.

NOPPEN - CONVEYOR BELTS

Profile Type 750

A (mm)	B (mm)	C (mm)
750	800	25
750	1000	250
750	1200	450

Profile Type 1030

A (mm)	B (mm)	C (mm)
1030	1400	185
1030	1600	285